防護服の用語：ボディアーマー、防弾チョッキ、プレートキャリアを理解する

In professional sectors such as law enforcement, military, and security, precise terminology is essential for specifying equipment that meets defined threat profiles. The terms “body armor,” “bulletproof vest,” and “plate carrier” are sometimes used interchangeably, but they refer to distinct products with different protective capabilities.

This article clarifies these terms, explains standardized protection levels, and provides a framework for selecting the appropriate gear based on operational requirements.

1. Defining the Terminology: Body Armor as the Broad Category

Body Armor is the overarching term for any personal protective equipment designed to protect the torso from ballistic (bullet) and/or stab threats. It encompasses two primary subcategories: Soft Armor and Hard Armor.

Using “body armor” as the general term is the most accurate approach, as it avoids the misleading implication of being “bulletproof,” which no armor can guarantee against all threats.

2. Soft Body Armor: The Ballistic-Resistant Vest

Commonly (and imprecisely) called a “bulletproof vest,” this is technically Soft Body Armor. It is a flexible garment constructed from multiple layers of tightly woven or laminated high-performance fibers, such as Aramid (e.g., ケブラー) or Ultra-High-Molecular-Weight Polyethylene (e.g., Dyneema®).

主要機能: To absorb and disperse the energy from handgun rounds and shell fragments (shrapnel).
保護レベル: Typically rated to standards like the U.S. National Institute of Justice (NIJ) Level II or IIIA. These levels are tested against specific handgun calibers and velocities.
主な特徴: Flexible, wearable for extended periods, and often concealable under clothing. It is not designed to stop rifle rounds or knife stabs (unless specifically engineered as a stab-resistant vest).

3. Hard Body Armor: The Ballistic Plate System

Hard Body Armor refers to rigid, monolithic, or composite ballistic plates. These plates are made from materials like pressed polyethylene, ceramic composites, or steel.

主要機能: To defeat high-velocity, high-energy rifle rounds.
Integration: Plates are not worn alone. They are inserted into a Plate Carrier or a vest with dedicated plate pockets.
保護レベル: Rated at higher NIJ levels, commonly Level III (rifle) or Level IV (armor-piercing rifle). A plate’s rating is specific to the plate itself, not the carrier.

4. The Plate Carrier: A Key Component

A Plate Carrier is a tactical vest specifically designed to hold hard ballistic plates. It is not the armor itself but a platform.

機能: Securely holds plates in the correct position, provides a means of donning/doffing, and often includes MOLLE/PALS webbing for attaching ancillary pouches (magazines, medical kits, etc.).
Variations: Some systems, like Modular Tactical Vests (MTVs) または Scalable Plate Carriers, integrate both soft armor panels (for fragmentation protection) and pockets for hard plates, creating a layered defense system.

5. Understanding Protection Standards: The NIJ Ratings

The most widely recognized benchmark is the NIJ Standard-0101.07. It helps to understand that armor is certified to stop a very specific set of test ammunition under controlled laboratory conditions.

Level II & IIIA: Handgun threats. IIIA offers protection against more powerful handgun rounds like .44 Magnum.
Level III: Rifle threats (e.g., 7.62x51mm NATO FMJ).
Level IV: Armor-piercing rifle threats (e.g., .30-06 M2 AP).

Important Considerations:

Conditional Protection: Armor is tested when new, and performance can be affected by environmental exposure, wear, and improper fit.
Shelf Life: The protective fibers in soft armor can degrade over time due to moisture, UV exposure, and routine flexing. Manufacturers typically assign a 5-year warranty or service life, after which replacement should be considered.

Check the 公式NIJ規格をご覧ください。

6. Selecting the Right Protective Solution

The choice depends on a documented Threat Assessment.

Consideration	Soft Body Armor (Vest)	Hard Armor Plates + Carrier
Primary Threat	Handguns, Fragmentation	Rifles, Armor-Piercing Rounds
Weight & Mobility	Lighter, More Flexible	Heavier, More Restrictive
Wear Duration	Suitable for Long Periods	Typically for Specific Missions
最適	Routine Patrol, Concealed Wear	Direct Action, High-Risk Entry

For a layered approach, many professionals use a plate carrier over a soft armor vest, combining fragmentation protection from the vest with rifle protection from the plates.

7. Partnering with a Professional Tactical Vest Manufacturer

として tactical vest and plate carrier manufacturer with over 15 years of experience, we provide clarity and solutions for our international clients.

Our expertise includes:

Manufacturing Plate Carriers and Tactical Vests: We engineer carriers for durability, ergonomics, and compatibility with standard-sized ballistic plates.
カスタマイズ: We offer custom tactical vests and carriers tailored to specific operational needs, including unique sizing, specialized pouch layouts, and integration with communication systems.
Material Sourcing & Guidance: While we manufacture the carrier systems, we understand the ballistic plate market and can advise on system compatibility.

Our role is to produce high-quality, reliable platforms that securely hold and interface with these life-saving components.

If you are procuring protective systems and require a reliable manufacturer for your plate carriers, modular vests, or related load-bearing equipment, お問い合わせ to discuss your project specifications.

大手タクティカルバッグ＆バックパックサプライヤー

グローバルブランドにカスタマイズされた卸売サービスを提供

コンサルティング・カスタマイズ

防護服の用語：ボディアーマー、防弾チョッキ、プレートキャリアを理解する

目次

大手タクティカルバッグ＆バックパックサプライヤー